These wood arrows are new, handmade and hand painted in the United States of America, from 32 inch premium 40-45 spine cedar shafts. These shafts were milled by Rose City Archery in Oregon.

Quantity: 6

Wood Type: Port Orford Cedar

Diameter: 11/32

Spine: 40-45

Max Length: 31.5 inches from the valley of the nock to the back of the point.

Fletching: Five inch shield cut turkey feathers. RW, Right helical twist.

Nock: Bohning Classic Plastic Nock

Point: 190 grain, 160grain, 145 grain, 125 grain or 100 grain steel field point. Your choice of point weight installed with Hot Melt glue.

My maximum arrow weight tolerance is 15 grains per matched set. (The lightest arrow and the heaviest arrow will have no more than a 15 grain weight difference). Most arrow sets have a weight spread that is lower than this. Look for the arrow build card in the photos to see the actual weight spread for this set, keeping in mind that the overall arrow weight will change from what is depicted on the card when the arrows are cut to length. Finished arrow weight will also be affected by the point weight that you choose at checkout. The weight provided on the build card is total uncut arrow weight plus 145 grains as a default point weight.

My build process includes hand straightening each shaft before and during the painting process, matching components by weight and aligning nocks with the wood grain in order to maximize consistency. I use two tones of wood stain instead of crown dip, allowing the natural wood grain to show through. I then add cresting rings with a paintbrush. Multiple coats of clear gloss finish makes each design pop.

Not for use with compound bows.